Differential pressure gauge SIKA MDS 0 to 0.6 bar

Type: MDS2101TA20AK
For wall mounting (3 mounting feet)
Type MDS 21, class 2.5
Housing material: aluminum
Cover: Makrolon
Housing diameter 100 mm, IP54
Measuring range: 0 to 0.6 bar
Pressure chamber: aluminum
Nominal pressure of the measuring system: 25 bar
Max. stat. Operating pressure: 10 bar
permissible ambient temperature: -10 ... + 70 ° C
permissible media temperature: + 85 ° C
Pressure connection: Cutting ring fitting for 6 mm pipe
(Steel / parallel behind each other),
with 1 adjustable microswitch (Wechlser) / potential-free,
elek.Anschlüsse: wired in cable connection box
Application: Thermal oil DIN 32727

• Pressure gauge according to EN 837-1
• Polyamide housing with outer ring steel black
• Connection thread made of brass or stainless steel
• Connections in parallel one after the other, 2x G½ B
• Accuracy according to EN 837-1, class 1.6
• Dial with double scale bar / mWS for reading the pressure prevailing in each system

The SIKA differential pressure manometer with 2 bourdon tubes is used for Measurement of two different pressures and display of the Differential pressure. By means of rotating scale disc bar / mWS as direct plus and minus differential pressure indication (each 50% of the Display area). The device is used in heating systems (Vorund Return flow) or in filter systems. Differential are to be selected so that the highest in the system occurring pressure is not higher than the full scale. The Pressure gauges can withstand ultimate load, but are not overpressure-proof. To ensure good readability of the differential pressure, the differential pressure should not be less than about 20% of the scale value be.